If you have a fire or water emergency, please call us now at (410) 857-5332

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

Water class and category

2/1/2019 (Permalink)

Water Damage Water class and category water damage

There are 3 Basic Categories of Water

Category 1 originates from a sanitary source and poses no substantial risk from dermal, ingestion, or inhalation exposure. However, it may not always remain clean after it comes into contact with other surfaces or materials.

Category 2 contains significant contamination and has the potential to cause discomfort or sickness if contacted or consumed by humans. It may contain potentially unsafe levels of microorganisms or nutrients for microorganisms, as well as other organic or inorganic matter (chemical or biological).

Category 3 is grossly contaminated and may contain pathogenic, toxigenic or other harmful agents. Such water sources may carry silt, organic matter, pesticides, heavy metals, regulated materials, or toxic organic substances.

The 4 Primary Classifications of Water Damage

Class 1 is the least amount of water, absorption and evaporation.  It affects only part of a room or area, or larger areas containing materials that have absorbed minimal moisture.  Little or no wet carpet and/or cushion is present.

Class 2 involves a large amount of water, absorption and evaporation.  It affects at least an entire room of carpet and cushion (pad).  Water has wicked up walls less than 24 inches.  There is moisture remaining in structural materials and substructure soil.

Class 3 involves the greatest amount of water, absorption and evaporation.  Water may have come from overhead.  Ceilings, walls, insulation, carpet, cushion and subfloor in virtually all of the entire area are saturated.

Class 4 relates to specialty drying situations.  Wet materials with very low permeance/porosity (eg. hardwood, plaster, brick, concrete, light-weight concrete and stone).  Typically, there are deep pockets of saturation, which require very low specific humidity.  These types of losses may require longer drying times and special methods.

Other News

View Recent Posts